Code 39 Stitching - Datalogic Magellan 9800i Product Reference Manual

Datalogic magellan 9800i sacnner

Hide thumbs Also See for Magellan 9800i:

Table of Contents

Code 39 Stitching

Enables/disables stitching for Code 39 labels. When parts of a Code 39 barcode are presented to

the scanner with this feature enabled, the barcode parts will be assembled by the scanner's

software, and the data will be decoded if all barcode proofing requirements are met.

To set this feature:

1. Scan the ENTER/EXIT Programming Mode bar code.

2. Scan your selection from the barcodes below. You'll need to cover any unused barcodes on

this and the facing page to ensure that the scanner reads only the barcode you intend to

3. Complete the programming sequence by scanning the ENTER/EXIT Programming

Mode bar code.

Code 39 Stitching = Enable

Product Reference Guide

Enter/Exit Programming Mode

Code 39 Stitching = Disable

Show Quick Links

Table of Contents