Step 2 - Mount And Position The Reader - Datalogic Matrix 120 Product Reference Manual

Step 2 - Mount and Position the Reader

1. To mount the Matrix 120, use the mounting brackets to obtain the most
suitable position for the reader. The most common mounting configuration
is shown in the figure below.
2. When mounting the Matrix 120, take into consideration these three ideal
label position angles: Pitch or Skew 10° to 20° and Tilt 0°, although the
reader can read a code at any tilt angle provided the code fits into the Field
Of View (FOV).
No Pitch,
Tilt or Skew
3. Refer to the reading diagrams in
reader should be positioned at.
Rapid Configuration of the Matrix 120 reader can be made either through the X-
PRESS™ interface (steps 3) which requires no PC connection, or by using the DL.CODE
Configuration Program (steps 5-6). Select the procedure according to your needs.
NOTE
Product Reference Guide
Figure 4 - Positioning with Mounting Bracket
Tilt
any angle
inside FOV
Pitch
Minimize
Figure 5 - Pitch, Skew and Tilt References
Chapter 6,
Step 2 - Mount and Position the Reader
Skew
assure at least 10°
FOV
V
to determine the distance your
FOV
H
5