Honda ACCORD HYBRID 2005 Service Manual page 1287

8. Raise the jack supporting the front subframe w i t h
the special tool until the subframe is in position
(see page 20-134).
9. Install the subframe rear bracket (A). Tighten the
12 m m flange bolts (B) and 14 m m bolts (C) to the
specified torque on the both sides of the vehicle.
C B
1 4 x 1 . 5 m m 1 2 x 1 . 2 5 m m
103 N-m 93 N-m
(10.5 k g f m , 75.9 Ibf-ft) (9.5 k g f m , 69 Ibf-ft)
10. Install the subframe front bracket (A) w i t h the
bracket m o u n t i n g bolts (B), then tighten the flange
bolts (C) to the specified torque on both sides of the
vehicle.
11. Install the subframe left m i d m o u n t (A).
49 N-m 1 2 x 1 . 2 5 m m
(5.0 kgf-m, 36 Ibf-ft) 44 N m (4.5 k g f m , 33 Ibf-ft)
12. Install the subframe right m i d m o u n t bolts (A).
A
1 0 x 1 . 2 5 m m
49 N m (5.0 kgf m, 36 Ibf-ft)
B
12 x 1.25 mm
54 N-m
(5.5 k g f m , 40 Ibf-ft)
C
14 x 1.5 m m
103 N-m
(10.5 kgf-m, 75.9 Ibf-ft)
(cont'd)
17-55