Honda ACCORD HYBRID 2005 Service Manual page 1503

Middle portion (shift lever portion)
8. Disconnect the parking brake switch connector (A),
radio antenna connector (B), antenna lead (C), A/C
subharness connector (D), then release the w i r e
harness clips (E).
Using a T30 Torx bit, remove the g r o u n d bolt (F).
Middle portion (passenger's side)
9. From under the dash, disconnect the ECM/PCM
connectors (A), power transistor connector (B), and
engine w i r e harness connector (C), then release the
w i r e harness clips (D).
Passenger's side
10. From under the dash, disconnect the passenger's
door w i r e harness connectors (A), roof w i r e
harness connector (B), floor w i r e harness
connectors (C), blower m o t o r connector (D), and
EPS control unit connector (E).
11. Detach all of the harness and connector clips.
12. Remove bolts, then remove the brake pedal
support m e m b e r (A).
Fastener Locations
• : Bolt, 2
13. Cover the parking brake handle to protect it.
(cont'd)
20-75