Honda ACCORD HYBRID 2005 Service Manual page 1211

0 ®
Outboard Joint Side
1. Remove the boot bands (A). Lift up the three tabs
(B) w i t h a screwdriver. Be careful not to damage
the boot and d y n a m i c damper.
Ear clamp type
B
2. Slide the outboard boot (A) partially to the inboard
joint side. Be careful not to damage the boot.
A
3. Wipe off the grease to expose the driveshaft and
the outboard joint inner race.
4. Make a mark (A) on the driveshaft (B) at the same
position of the outboard joint end (C).
5. Carefully clamp the driveshaft in a vise.
6. Remove the outboard joint (A) using the threaded
adapter and a commercially available 5/8" x 18
UNF slide h a m m e r (B).
7. Remove the driveshaft f r o m the vise.
(cont'd)
16-7