Honda ACCORD HYBRID 2005 Service Manual page 1485

From both sides, remove the sunvisor (A) and
holder (B).
- 1 Remove the self-tapping ET screws.
- 2 Remove the sunvisor f r o m the body and holder.
- 3 Disconnect the vanity m i r r o r light connector
(C).
- 4 Using a flat-tip screwdriver, push the hook (D),
turn the holder 90 °, and then pull it out.
Fastener Locations
• : S c r e w , 2
5 x 0.8 m m
3.4 N-m (0.35 k g f m , 2.5 Ibfft)
4. Remove the roof console (A).
- 1 Remove the lenses (B).
- 2 Remove the bolts (C, D).
- 3 Pull out the roof console, and front individual
m a p light (E). Disconnect the front individual
m a p light connector (F) and ambient light
connector (G).
Fastener Locations
C • : Bolt, 2 D • : Bolt, 2
5 x 0.8 m m
5 N-m
(0.5 kgf-m,
4 Ibf ft)
Lower the grab handle, then pry out the lids (A).
Remove the self-tapping ET screws, then r e m o v e
the grab handle (B). Remove the remaining grab
handles.
Fastener Locations
• : S c r e w , 8
5 x 0.8 m m
3.4 N-m
(0.35 k g f m , 2.5 Ibfft)
(cont'd)
20-57