Honda ACCORD HYBRID 2005 Service Manual page 1497

C e n t e r P o c k e t R e m o v a l / I n s t a l l a t i o n
W i t h o u t Navigation System
SRS c o m p o n e n t s are located in this area. Review the
SRS c o m p o n e n t locations (see page 24-11) and the
precautions and procedures (see page 24-13) before
p e r f o r m i n g repairs or servise.
NOTE:
• Put on gloves to protect your hands.
• Take care not to scratch the dashboard and related
parts.
1. Remove the center holder (see page 20-62).
2. Remove the center pocket (A).
- 1 Remove the screws (B).
- 2 Open the lid, then pull the pocket back by hand
to detach the clips (C).
- 3 Close the lid, then remove the pocket.
Fastener Locations
B • : S c r e w , 2 C [> : Clip, 2
3. Install the pocket in the reverse order of r e m o v a l ,
and note these items:
• Make sure the holders (D) are installed onto the
pins (E) properly.
• Push the clipped portions into place securely.
• Make sure the center pocket lid opens smoothly.
W i t h Navigation S y s t e m
SRS c o m p o n e n t s are located in this area. Review the
SRS c o m p o n e n t locations (see page 24-11) and the
precautions and procedures (see page 24-13) before
p e r f o r m i n g repairs or servise.
NOTE:
• Put on gloves to protect y o u r hands.
• Take care not to scratch the dashboard and related
parts.
1. Remove the center holder (see page 20-62).
2. Remove the center pocket (A).
- 1 Remove the screws (B).
- 2 Open the lid, then pull the pocket back by hand
to detach the clips (C).
Fastener Locations
B • : S c r e w , 2 C > : Clip, 2
3. Install the pocket in the reverse order of r e m o v a l ,
and note these items:
• Push the clipped portions into place securely.
• Make sure the center pocket lid opens s m o o t h l y .
20-69