Honda ACCORD HYBRID 2005 Service Manual page 1185

17. Install the intermediary shaft (A) into the main
valve body, and install the 26.5 m m washer (B) on
the top of the intermediary shaft.
18. Install the differential assembly (C) in the torque
converter housing.
19. Install the baffle plate (D), and make sure if the
differential is clear of the baffle plate.
20. Install the baffle plate (E), and make sure if the
intermediary shaft is clear of the baffle plate.
2 1 . Install new O-rings (F) on the ATFP joint pipe ends,
then install the ATFP joint pipe (G).
22. Install the selector control shaft and the park lever
link(H).
23. Assemble the mainshaft, coutershaft, and
secondary shaft.
24. Install the needle bearing (A) on the secondary
shaft roller bearing in the torque converter housing.
E
A
25. Turn the shift fork shaft (B) so the large c h a m f e r e d
hole is facing the fork bolt hole of the shift fork.
26. Engage the shift fork (C) w i t h the reverse selector
on the countershaft, and join the mainshaft (D),
countershaft (E), and secondary shaft (F), then
install t h e m in the torque converter housing and
shift fork on the shift fork shaft.
(cont'd)
14-349