Honda ACCORD HYBRID 2005 Service Manual page 1220

Driveline/Axle
D r i v e s h a f t R e a s s e m b l y ( c o n t ' d )
6. Check the alignment of the paint mark (A) w i t h the
o u t b o a r d joint end (B).
7. Pack the outboard joint (A) w i t h the joint grease
included in the new joint boot set.
Grease quantity
Outboard joint: 140—150 g (4.9—5.3 oz)
8. Adjust the length of the driveshafts to these
measurements, then adjust the boots to halfway
between full compression and full extension. Make
sure the ends of the boots seat in the groove of the
driveshaft and joint.
Left driveshaft: 5 1 1 - 5 1 6 m m (20.12-20.31 in.)
Right driveshaft: 480—485 mm (18.90—19.09 in.)
16-16