Qos; General; Figure 4.88 Qos > General > Qos Properties; Figure 4.89 Qos > General > Qos Settings - Advantech EKI-7706 Series User Manual

4.8

QoS

The QoS function allows you to configure settings for the switch QoS interface and
how the switch connects to a remote server to get services.
4.8.1

General

Traditionally, networks operate on a best-effort delivery basis, all traffic has equal
priority and an equal chance of being delivered in a timely manner. When there is
congestion, all traffic has an equal chance of being dropped.
The QoS feature can be configured for congestion-management and congestion-
avoidance to specifically manage the priority of the traffic delivery. Implementing QoS
in the network makes performance predictable and bandwidth utilization much more
effective.
The QoS implementation is based on the prioritization values in Layer 2 frames.
4.8.1.1 QoS Properties
The QoS Properties allows you to set the QoS mode.
To access this page, click QoS > General > QoS Properties.
The following table describes the items in the previous figure.
Item
QoS Mode
Apply
The ensuing table for QoS Global Information lists the following settings
(informational only):
QoS Mode
4.8.1.2 QoS Settings
Once the QoS function is enabled, you can configure the available settings.
To access this page, click QoS > General > QoS Settings.
EKI-7706 Series User Manual
Figure 4.88 QoS > General > QoS Properties
Description
Select Disabled or Basic to setup the QoS function.
Click Apply to save the values and update the screen.
Figure 4.89 QoS > General > QoS Settings
93