M
S
ANAGING
WITCH
4.8. QoS
The QoS function allows you to configure settings for the switch QoS interface and how the
switch connects to a remote server to get services.
4.8.1 General
Traditionally, networks operate on a best-effort delivery basis, all traffic has equal priority
and an equal chance of being delivered in a timely manner. When there is congestion, all
traffic has an equal chance of being dropped.
The QoS feature can be configured for congestion-management and congestion-avoidance
to specifically manage the priority of the traffic delivery. Implementing QoS in the network
makes performance predictable and bandwidth utilization much more effective.
The QoS implementation is based on the prioritization values in Layer 2 frames.
QoS Properties
The QoS Properties allows you to set the QoS mode.
To access this page, click QoS > General > QoS Properties.
The following table describes the items in the previous figure.
Table 4-67. QoS > General > QoS Properties
Item
QoS Mode
Apply
The ensuing table for QoS Global Information settings are informational only: QoS Mode.
97
Figure 4-69. QoS > General > QoS Properties
Select Disabled or Basic to setup the QoS function.
Click Apply to save the values and update the screen.
Description