Global; Interface Configuration; Configuration; Figure 4.164Switching > Dhcp Snooping > L2 Relay Global - Advantech EKI-9516P-HV User Manual

Eki-9500 series
Table of Contents

Advertisement

Item
DHCP Server Msgs
Received
Refresh
Clear Counters
4.4.2.2
L2 Relay

Global

Use the DHCP L2 Relay Global Configuration page to control the administrative
mode of DHCP Layer 2 Relay on the device. In Layer 2 switched networks, there
may be one or more infrastructure devices (for example, a switch) between the client
and the L3 Relay agent/DHCP server. In this instance, some of the client device infor-
mation required by the L3 Relay agent may not be visible to it. When this happens,
an L2 Relay agent can be used to add the information that the L3 Relay Agent and
DHCP server need to perform their roles in IP address configuration and assignment.
To access this page, click Switching > DHCP Snooping > L2 Relay > Global.
Figure 4.164 Switching > DHCP Snooping > L2 Relay > Global
The following table describes the items in the previous figure.
Item
Admin Mode
Submit
Refresh
Cancel

Interface Configuration

Use the DHCP L2 Relay Interface Configuration page to enable L2 DHCP relay on
individual ports. Note that L2 DHCP relay must also be enabled globally on the
device. To change the DHCP L2 relay settings for one or more interfaces, select each
entry to modify and click Edit. The same settings are applied to all selected inter-
faces.
To access this page, click Switching > DHCP Snooping > L2 Relay > Interface

Configuration.

Figure 4.165 Switching > DHCP Snooping > L2 Relay > Interface Configuration
EKI-9500 Series User Manual
Description
The number of DHCP server messages (DHCPOFFER, DHCPACK,
DHCPNAK, DHCPRELEASEQUERY) that have been dropped on an
untrusted port.
Click Refresh to update the screen.
Click Clear Counters to reset all statistics to zero for all interfaces.
Description
The global mode of DHCP L2 relay on the device. When enabled, the
device can act as a DHCP L2 relay agent. This functionality must also
be enabled on each port you want this service to operate on.
Click Submit to save the values and update the screen.
Click Refresh to update the screen.
Click Cancel to restore default value.
158

Advertisement

Table of Contents
loading

Table of Contents