L2 Switching; Port Configuration; Figure 4.15 L2 Switching > Port Configuration - Advantech EKI-7710E-2C User Manual

Item
Recurring From
Recurring To
Non-Recurring From Click the drop-down menu to designate a start date and time for a
Non-Recurring To
Apply
The ensuing table for System Time Information settings are informational only: Cur-
rent Date/Time, SNTP, SNTP Server Address, SNTP Server Port, Time zone, Day-
light Saving Time, Daylight Saving Time Offset, From and To.
4.5

L2 Switching

4.5.1

Port Configuration

Port Configuration describes how to use the user interface to configure LAN ports on
the switch.
To access this page, click L2 Switching > Port Configuration.
The following table describes the items in the previous figure.
Item
Port
Enabled
Speed
Duplex
Flow Control
Apply
The ensuing table for Port Status settings are informational only: Port, Edit (click to
enter description), Enable State, Link Status, Speed, Duplex, FlowCtrl Config and
FlowCtrl Status.
EKI-7710 Series User Manual
Description
Click the drop-down menu to designate the start date and time for
daylight saving time.
Click the drop-down menu to designate the end date and time for day-
light saving time.
non-recurring daylight saving time event.
Click the drop-down menu to designate the end date and time for a
non-recurring daylight saving time event.
Click Apply to save the values and update the screen.
Figure 4.15 L2 Switching > Port Configuration
Description
Click the drop-down menu to select the port for the L2 Switch setting.
Click the radio-button to enable or disable the Port Setting function.
Click the drop-down menu to select the port speed: Auto, Auto-10M,
Auto-100M, Auto-1000M, Auto-10/100M, 10M, 100M, or 1000M.
Click the drop-down menu to select the duplex setting: Half or Full.
Click the radio button to enable or disable the flow control function.
Click Apply to save the values and update the screen.
45