Figure 4.125System > Port > Transceiver Brief - Advantech EKI-9516P-HV User Manual

Item
Source
Direction
Refresh
Configure Session
Configure Source
Remove Source
4.3.11.5 Transceiver Brief
Use the Port Transceiver Brief page to display Digital Diagnostics Monitoring Inter-
face information about plug-in transceiver.
To access this page, click System > Port > Transceiver Brief.
The following table describes the items in the previous figure.
Item
Interface
Temperature
Voltage
Bias Current
Tx Power
Rx Power
High Alarm Thresh-
old
High Warning
Threshold
Low Warning Thresh-
old
Low Alarm Threshold The low alarm threshold will be displayed by blue color.
EKI-9500 Series User Manual
Description
The ports or VLAN configured to mirror traffic to the destination. You
can configure multiple source ports or one source VLAN per session.
The source VLAN can also be a remote VLAN.
The direction of traffic on the source port (or source ports) or VLAN
that is sent to the specified destination. A source VLAN mirrors all
received and transmitted packets to the destination. Possible values
for source ports are:

Tx and Rx: Both ingress and egress traffic.

Rx: Ingress traffic only.

Tx: Egress traffic only.
Click Refresh to update the screen.
Click Configure Session to configure the administrative mode for a
port mirroring session or to select an ACL for flow-based mirroring.
Click Configure Source to configure one or more source ports or a
VLAN for the mirroring session and to determine which traffic is mir-
rored (Tx, Rx, or both).
Click Remove Source to remove the selected source ports.
Figure 4.125 System > Port > Transceiver Brief
Description
Identifies the port.
The internal temperature of the transceiver measured value.
The supply voltage of the transceiver measured value.
The bias current of the transceiver measured value.
The transmission power of the transceiver measured value.
The received power of the transceiver measured value.
The high alarm threshold will be displayed by red color.
The high warning threshold will be displayed by orange color.
The low warning threshold will be displayed by green color.
122