Operation; Monitoring With The Ktp400; Ktp400 Screens; Start Screen - Siemens SIMATIC HMI KTP400 Manual

5 Operation

Operation
5
Hinweis
Operating via integrated and user defined webserver, the LOGO! display and
LOGO! TDE is described in LOGO! Set 9. For LOGO! Set 9 refer to the following
entry:
Building Automation Systems: House control with LOGO! and Master-Slave
communication (LOGO! Set 9)
https://support.industry.siemens.com/cs/ww/en/view/64143308
5.1

Monitoring with the KTP400

5.1.1

KTP400 screens

All KTP screens have a uniform toolbar on the right:
Press one of the buttons to go to the following screens:

Start

Weather

System

Support

Language switching
Note Synchronized language change from Basic Panel to LOGO! 8:
If the KTP400 is used to change the language with the button, the display
language on the LOGO! display and LOGO! TDE will also change.
5.1.2

Start screen

Figure 5-1
This screen is displayed right after system start.
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
27