Developing Motor (M1); Main Motor (M2) - Konica Minolta bizhub C25 Service Manual

7. OTHER MAINTENANCE ITEM
7.3.19

Developing motor (M1)

1. Remove the waste toner bottle.
See P.14
2. Remove the rear cover.
See P.43
3. Remove the left cover.
See P.43
4. Remove the rear right cover.
See P.44
5. Remove the FAX board.
See P.50
6. Remove the high voltage unit.
See P.57
[2]
[3]
9. To reinstall, reverse the order of removal.
7.3.20

Main motor (M2)

1. Remove the waste toner bottle.
See P.14
2. Remove the rear cover.
See P.43
3. Remove the left cover.
See P.43
4. Remove the rear right cover.
See P.44
5. Remove the FAX board.
See P.50
6. Remove the high voltage unit.
See P.57
68
[1]
[2]
A2YFF2C084DA
Field Service Ver. 1.1 May 2011
7. Disconnect the connector [1].
8. Remove four screws [2], and remove
the developing motor [3].
NOTE
• When installing the motor, try to
insert it straight, and take care not
to damage the gears.