Safety Information - Oracle Database Appliance X6-2-HA Manual

Component
Server node battery (CRU)
Processors (CPUs) (FRU)
Motherboard (FRU)
Server node internal cables (FRU)
Power distribution board (FRU)
Disk midplane module (FRU)
Disk midplane module HDD cable
(FRU)
Front indicator panels (FRU)

Safety Information

Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section provides important safety information. Read it before servicing Oracle Database
Appliance.
Hazardous voltage present. Never run the system with the top cover removed.
Caution -
Equipment damage. Install the system top cover properly before starting the system.
Caution -
For your protection, observe the following safety precautions when setting up your equipment:
Policy
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, system chassis – Servicing this component requires that the
power be completely removed from the system chassis (both server nodes
powered off).
Cold service, system chassis – Servicing this component requires that the
power be completely removed from the system chassis (both server nodes
powered off).
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, system chassis – Servicing this component requires that the
power be completely removed from the system chassis (both server nodes
powered off).
Appendix A • Servicing the Oracle Database Appliance Version 1
Preparing to Service
107