Safety Information; General; Frames; Table 3: Safety Information Icons And Text - Oracle Tekelec 1200 Maintenance Manual

Platform Maintenance

Safety Information

General

The icons and text shown in
to alert the reader, to assure personnel safety, to minimize service interruptions, and to warn of potential
equipment damage.
Note: All personnel must be aware of and conform to the safety information provided in each "Safety
Information" section of this manual.

Table 3: Safety Information Icons and Text

Tip: (This icon and text indicate the possibility of personnel injury and equipment damage.)
Danger: (This icon and text indicate the possibility of personnel injury.)
Attention: (This icon and text indicate the possibility of equipment damage and personnel injury.)
Caution: (This icon and text indicate the possibility of service interruption and
personnel injury.)
Warning: All personnel associated with the installation of these systems must adhere
to all safety precautions and use required protection equipment to avoid the possibility
of injury, equipment damage, service degradation, or service interruption.
Warning: This procedure may interrupt service. When possible, perform maintenance
during low traffic and database provisioning periods, such as the maintenance window

Frames

Topple: Always read and understand instructions thoroughly and completely before
working on, moving, raising or lowering the cabinet, any portion of the cabinet,
attachments to the cabinet, or equipment.
Topple: Never try to unpack any frame from the shipping container without at least
two people to steady any movement of the frame and related components. At least two
people are required to safely move and position a frame into place.
910-5680-001 Revision F, February 2014
Table 3: Safety Information Icons and Text
Safety and Pre-Installation Requirements
are used throughout this manual
20