Adjusting the Feed Amount .................................................................................................................................. 558

Selecting a Feed Amount Adjustment Method ................................................................................................. 558

Automatic Banding Adjustment ....................................................................................................................... 559

Manual Banding Adjustment ............................................................................................................................ 560

Fine-Tuning the Paper Feed Amount ............................................................................................................... 562

Adjusting Line Length ...................................................................................................................................... 563

Adjusting Color on the Trailing Edge of Sheets ...................................................................................................... 564

Adjusting the Vacuum Strength ............................................................................................................................ 565

Adjusting the Feed Amount

If printed documents are affected by the following problems, try adjusting the feed amount.

•

Banding in different colors

•

Line length is not accurate in the direction paper is fed

To adjust the feed amount, do the following, in this order.

Depending on the issue, adjust Adj. Priority to suit the particular type of paper.

(See "Selecting a Feed Amount Adjustment Method.")

Execute Adj. Quality or Adjust Length, depending on the selection in Adj. Priority.

(See "Automatic Banding Adjustment.")

(See "Manual Banding Adjustment.")

(See "Adjusting Line Length.")

After executing Adj. Quality, execute Adj. Fine Feed for further adjustment as needed.

(See "Fine-Tuning the Paper Feed Amount.")

Selecting a Feed Amount Adjustment Method

There are two methods of adjusting the paper feed amount, Print Quality and Print Length, either of which will be

applied during printing.

Since the method that is applied during printing is determined from the value of the Adj. Priority setting, configure the

Adj. Priority to match the print target.

Print Quality: Adjusts the feed amount to reduce banding across the sheet in printed documents.

•

Adj. Quality settings are applied. When Adj. Fine Feed is executed, the Adj. Fine Feed settings are applied in

addition to the Adj. Quality settings.

•

Print Length: Adjusts the feed amount for better accuracy of lines in printed documents.

The settings of A:High or B:Standard/Draft in Adjust Length are applied.

Automatic: Print Quality or Print Length is selected, depending on Print Priority as selected in the printer driv-

•

er at the time of printing.

•

Either A:High or B:Standard/Draft in the Adjust Length menu is applied, depending on printer driver settings at the

time of printing.

Note

Follow these steps to configure the settings.

558

Load the paper.

Loading Rolls on the Roll Holder

•

Loading Rolls in the Printer

P.558

➔

P.559

➔

P.560

➔

P.563

➔

P.562

➔

P.363

➔

P.365

➔

iPF6400SE

User's Guide

Table of Contents

Adjusting The Feed Amount; Selecting A Feed Amount Adjustment Method - Canon imagePROGRAF iPF6400SE User Manual