Exit Remote Diagnostics - Siemens SINUMERIK 840D sl Operating Manual

Data
Send interval
Ping send
data
Procedure
References
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
See also
Permit modem (Page 270)
13.8.4

Exit remote diagnostics

Procedure
See also
Permit modem (Page 270)
Setting remote access (Page 268)
Universal
Operating Manual, 03/2010, 6FC5398-6AP10-4BA0
Meaning
Cycle in which the message is sent to the remote PC in seconds
Message for the remote PC
1. The "Remote diagnostics (RCS)" window is opened.
2. Press the "Request remote diagnostics" softkey.
The "Request remote diagnostics" window is displayed.
3. Press the "Change" softkey if you would like to edit the values.
4. Press the "OK" softkey.
The request is sent to the remote PC.
1. The "Remote diagnostics (RCS)" is opened and it is possible that
remote monitoring or remote access is active.
2. Block modem access if access via modem is to be blocked .
- OR -
In the "Remote diagnostics (RCS)" window, reset the access rights to
"Permit no remote access" .
Alarm, error, and system messages
13.8 Remote diagnostics
271