Exit Remote Diagnostics - Siemens SINUMERIK 840D sl Operating Manual

Alarm, error and system messages
25.9 Remote diagnostics
Data
IP address
Port
Send duration Duration of the request in minutes
Send interval
Ping send
data
Procedure
References
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
25.9.4

Exit remote diagnostics

Procedure
834
Meaning
IP address of the remote PC
Standard port that is intended for remote diagnostics
Cycle in which the message is sent to the remote PC in seconds
Message for the remote PC
1. The "Remote diagnostics (RCS)" window is opened.
2. Press the "Request remote diagnostics" softkey.
The "Request remote diagnostics" window is displayed.
3. Press the "Change" softkey if you would like to edit the values.
4. Press the "OK" softkey.
The request is sent to the remote PC.
1. The "Remote diagnostics (RCS)" is opened and it is possible that
remote monitoring or remote access is active.
2. Block the modem access if access via modem is to be blocked.
- OR -
In the "Remote Diagnostics (RCS)" window, reset the access rights to
"Permit no remote access".
Operating Manual, 02/2012, 6FC5398-8CP40-3BA0
Turning