Exit Remote Diagnostics - Siemens SINUMERIK 828D Operating Manual

Data
Send interval
Ping send
data
Procedure
References
HMI sl / 840D sl Commissioning Manual
20.9.4

Exit remote diagnostics

Procedure
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Meaning
Cycle in which the message is sent to the remote PC in seconds
Message for the remote PC
1. The "Remote diagnostics (RCS)" window is opened.
2. Press the "Request remote diagnostics" softkey.
The "Request remote diagnostics" window is displayed.
3. Press the "Change" softkey if you would like to edit the values.
4. Press the "OK" softkey.
The request is sent to the remote PC.
1. The "Remote diagnostics (RCS)" is opened and it is possible that
remote monitoring or remote access is active.
2. Block modem access if access via modem is to be blocked .
- OR -
In the "Remote diagnostics (RCS)" window, reset the access rights to
"Permit no remote access" .
Alarms, error messages, and system alarms
20.9 Remote diagnostics
485