Key Functions In Measurement Mode; Programming Sitrans Lut400 - Siemens SITRANS LUT400 Operating Instructions Manual

Commissioning
6.2 Activating SITRANS LUT400
6.2.1.3

Key functions in Measurement mode

Key
6.2.2

Programming SITRANS LUT400

Note
• To enter Program mode using the device local push buttons, press
return to Measurement mode.
• While the device is in Program mode, the output remains active and continues to respond
to changes in the device.
Change parameter settings and set operating conditions to suit your specific application. (For
remote operation, see Operation via SIMATIC PDM 6 (HART) (Page 161) or Operation via
AMS Device Manager (HART) (Page 164).)
Parameter menus
Note
For the complete list of parameters with instructions, see Parameter reference (LUI)
(Page 167).
Parameters are identified by name and organized into function groups, then arranged in a 5-
level menu structure, as in the example below. (For full menu see LCD menu structure
(Page 308).)
1. WIZARDS
2. SETUP
2.1 SENSOR
.........
2.7 PUMPS
54
Function
RIGHT arrow opens PROGRAM mode.
UP or DOWN arrow toggles between PV and
SV.
2.7.1 BASIC SETUP
2.7.2 MODIFIERS
2.7.2.1.1 ENABLE
Result
Opens the top level menu.
LCD displays primary or secondary
value.
. Press
Operating Instructions, 07/2019, A5E33329501-AC
to
SITRANS LUT400