Call Forwarding - Centrex - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

The Call Forwarding – Centrex feature allows a station to forward an incoming PBX/Centrex CO call to

an outside location using the same PBX/Centrex CO line to free the line for additional use.

Call Forwarding – Centrex supports the following:

Call Forward – Immediate

Call Forward – Busy

Call Forward – No Answer

Call Forward – Busy/No Answer

Call Forwarding – Centrex calls transferred from another station are forwarded when the

transferred Trunk is assigned as PBX in Program 14-04-01.

The following incoming calls follow Call Forwarding – Centrex when the incoming trunk is a

PBX/Centrex trunk:

Station Transfer

Automated Attendant Transfer

Call Forwarding – Centrex is not supported for Call Forward Both Ring Split.

A maximum of 24 digits can be assigned in the destination for Call Forwarding – Centrex.

When a trunk is set to CTX/PBX, and is set for Call Forwarding – Centrex to an incorrect

number, the call recalls and follow CO incoming ringing (i.e., DIL, Normal Ring Group

Programming).

When Call Forwarding – Centrex is set and all trunks are changed in Program 14-04-01

from PBX to Trunk, Call Forward is cleared from memory.

When DND and any Call Forwarding – Centrex is set, the call forwards immediately.

Call Forwarding – Centrex does not follow the Code Restriction of the stations.

Call Forwarding – Centrex