Slot Control - NEC Univerge SV8100 Programming Manual

Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
Issue 1.0
Level:
IN
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-05 : Slot Control to reset or delete (uninstall) blades (slots 1~24).
Delete allows you to completely uninstall the blade. You should do this if you want to
remove a blade and plug it into a different slot and still retain the port assignments. If
a different type of interface blade is being installed in a slot previously used (e.g.,
changing from a LCA to an DLCA blade), the slot should be deleted (option 1) first
before installing the new interface blade.
Reset allows you to send a reset code.
Input Data
Conditions
Feature Cross Reference
None
2 - 700
Program 90 : Maintenance Program
Menu Number
Item
Item
No.
01

Slot Control

When you delete or reset a blade, you must first remove it from its slot then run
Program 90-05. When reusing the slot for another blade, you must plug the blade
in or reset the system before the system can use the slot again.
When you delete or reset a blade, all related programming in Program 10-03-01 is
set back to default.
90-05 : Slot Control
Input Data
Slot Number (1~24)
Program 90 : Maintenance Program
UNIVERGE SV8100
1 = Delete
2 = Reset
3 = Set Busy Out
4 = Reset Busy Out