Clearing Bios Settings (Cmos Memory) - NEC Express5800/R120g-1E Maintenance Manual

Chapter 1 Maintenance
7.4

Clearing BIOS Settings (CMOS Memory)

To set the BIOS settings back to the factory settings (clearing CMOS memory), use the jumper switch.
You can also clear the password of BIOS Setup Utility (SETUP) by using the jumper switch.
To clear the password or the CMOS memory, use the corresponding jumper switch illustrated in the figure
below.
Tips
Use BIOS Setup Utility (SETUP) usually to return the settings to the factory
settings.
Important
Do not change other jumper switches. Any change will cause the server to
fail or malfunction.
Clear CMOS Jumper
Protect(factory setting)
Clear
Express5800/R120g-1E Maintenance Guide
7. Resetting and Clearing the Server
Clear Password Jumper
Protect(factory setting)
Clear
47