Using A Usb Memory Stick; By Entering The Code Manually - NEC Univerge SV8100 User Manual

Issue 1.0
___________________________________________________________________________________
5.3
5.4
___________________________________________________________________________________
1 - 30

Using a USB Memory Stick

To install a license using a USB memory stick, copy the license files to the
root of the memory stick. Plug the USB stick into the USB connector on the
front of the CCPU and using TelePro go into Program 10-49-01. Enter 1 to
start reading in any licenses from the USB stick. The SV8100 will read in any
licenses for its own CCPU. If more than one file for the same system exist in
the root of the USB stick, it will read them all. If the license is read in
successfully then Entry OK is displayed on the handset.
If the free license was running, set Program 90-55-01 to 0 to turn it off.
If the free license was not running and a license is installed, you should set
Program 90-55-01 to 1 and then change it to back to 0.
To view the installed licenses, connect to PCPro / WebPro.

By Entering the Code Manually

It is also possible to enter a license code manually in TelePro. Start by
opening the .lic file that you wish to install. You will see the Software Key
Code, Activation Code and Feature Codes. Login to TelePro and go to
Program 10-48-01 and enter the Software Key Code. In Program10-48-02,
enter the Activation Code. In Program 10-48-03, enter the Feature Codes.
Once all of these have been entered, press the Submit softkey.
If the free license was running, set Program 90-55-01 to 0 to turn it off.
If the free license was not running and a license is installed, you should set
Program 90-55-01 to 1 and then change it to back to 0.
To view the installed licenses, connect to PCPro / WebPro.
License Manager Server
User Guide