Usb Connection By K410-150(00) Suv Cable; Connecting With Network - NEC Express5800 Series User Manual

Chapter 2 Preparations

2.2.1 USB Connection by K410-150(00) SUV Cable

Connect a floppy disk drive, external DVD-ROM drive, keyboard, and mouse according to the figure shown
below. Use the separately priced K410-150(00) SUV cable (or a standard accessory for the Blade Enclosure
(SIGMABLADE).
However, when using a display unit, keyboard, and mouse connected to the Blade Enclosure by using the
KVM selection feature of the Blade Enclosure, do not connect those devices by way of a SUV cable.
DMP
1
DMP
1
RST
2
RST
2
ID
ID
*1 Do not connect an external floppy disk drive and Flash FDD at the same time.
*2 Use the USB hub and external DVD-ROM drive supported by this CPU blade.

2.2.2 Connecting with Network

The CPU blade is connected with network via the Blade Enclosure. Refer to the User's Guide of the Blade
Enclosure for details.
80
USB
USB
Express5800/B120d, B110d User's Guide
2. Installation and Connection
Display unit
External floppy disk drive
or
*1
Flash FDD
Self-powered USB External DVD-ROM
*2 *2
hub drive
Mouse
Keyboard