Duplexing Unit; Before Removing The Duplex Feeding Unit; Removing The Duplex Feeding Unit; Duplex Feed Motor - Canon imageRUNNER 5065 series Service Manual

Chapter 8

8.10.35 Duplexing Unit

8.10.35.1 Before Removing the Duplex Feeding Unit

iR5065 / iR 5055 / iR5075 / / /
1) Detach the duplexing
12)Reference[Removing the Duplexing Feed Front Cover]

8.10.35.2 Removing the Duplex Feeding Unit

iR5065 / iR 5055 / iR5075 / / /
1) Remove the duplex feeding unit with holding its grip [1] (right/left) from
the machine.
Be careful not to trap your hand between the grip and the rail. Further, do not
place the duplex unit where the parts might suffer damage.

8.10.36 Duplex Feed Motor

8.10.36.1 Before Removing the Duplex Feeding Left
Motor
iR5065 / iR 5055 / iR5075 / / /
1) Detach the duplexing
12)Reference[Removing the Duplexing Feed Front Cover]
2) Remove the duplex feeding unit.(page 8-44)Reference[Removing the
Duplex Feeding Unit]

8.10.36.2 Removing the Duplex Feeding Left Motor

iR5065 / iR 5055 / iR5075 / / /
1) Remove the duplex feeding left motor [3].
- 1 connector [1]
- 2 screws [2]
[2]
8.10.36.3 Before Removing the Duplex Feeding Right
Motor
iR5065 / iR 5055 / iR5075 / / /
1) Detach the duplexing
12)Reference[Removing the Duplexing Feed Front Cover]
2) Remove the duplex feeding unit.(page 8-44)Reference[Removing the
Duplex Feeding Unit]

8.10.36.4 Removing the Duplex Feeding Right Motor

iR5065 / iR 5055 / iR5075 / / /
8-44
feed front cover.(page
[1]
F-8-149
feed front cover.(page
[1]
[3] [2]
F-8-150
feed front cover.(page
1) Remove the duplex feeding right motor [3].
- 1 connector [1]
- 2 screws [2]
0015-8267
10-
0015-5232

8.10.37 Duplex Feed Sensor

8.10.37.1 Before Removing the Duplex Pre-Registration
Sensor
iR5065 / iR 5055 / iR5075 / / /
1) Detach the
12)Reference[Removing the Duplexing Feed Front Cover]
2) Remove the duplex feeding unit.(page 8-44)Reference[Removing the
Duplex Feeding Unit]
8.10.37.2 Removing the Duplex Pre-Registration Sensor
iR5065 / iR 5055 / iR5075 / / /
1) Detach the cover [2].
- 2 screws [1]
0015-9406
10-
0015-9395
2) Detach the sensor together with the mount [3].
- 2 screws [1]
- 1 grounding wire [2]
0015-9407
10-
3) Remove the sensor [2].
- 1 connector [1]
0015-9396
[1]
[2] [3] [2]
F-8-151
duplexing feed front cover.(page
[1]
[2]
F-8-152
[1] [3] [1]
F-8-153
0015-9409
10-
0015-9408
[2]