Supplying Toner - Canon CLC5000 Service Manual

CHAPTER 3 INSTALLATION

3.3 Supplying Toner

Step
1 As if to invert the top and the bottom,
shake the C toner container 20 times or
more.
Do not perform this step until
immediately before setting the
bottle to the hopper.
2 Open the lid of the C toner hopper, and
fit the C toner bottle in the opening of
the hopper; hold the base of the bottle,
and turn the bottle clockwise until it
stops (about 10°).
3 Pull the slide shutter of the C toner bottle
toward the front, and lightly tap on the
bottom and the side of the bottle two to
three times.
• Take note of the time at which toner
supply operation starts.
• Check to make sure that the toner has
poured into the hopper.
4 Close the slide shutter of the C toner
bottle, and turn the bottle counterclock-
wise (about 10°) to remove.
Check to make sure no toner remains on
the mesh over the inlet to the hopper;
otherwise, tap on the hopper until all
toner has fallen into the hopper.
3-14
Work
COPYRIGHT © 2001 CANON INC.
Remarks
F03-303-01
F03-303-02
2000 2000 2000 2000
Slide shutter
CANON CLC5000 REV.0 JAN. 2001