H3C S3100 Series Command Manual page 112

task-id: ID of a task, with the value ranging from 1 to 100.
socket-id: ID of a socket, with the value ranging from 0 to 3072.
Description
Use the display ip socket command to display socket information.
Examples
# Display the information about the socket of the TCP type.
<Sysname> display ip socket socktype 1
SOCK_STREAM:
Task = VTYD(18), socketid = 1, Proto = 6,
LA = 0.0.0.0:23, FA = 0.0.0.0:0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_KEEPALIVE SO_SENDVPNID SO_SETKEEPALIVE,
socket state = SS_PRIV SS_ASYNC
Task = VTYD(18), socketid = 2, Proto = 6,
LA = 10.153.17.99:23, FA = 10.153.17.56:1161,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_KEEPALIVE SO_OOBINLINE SO_SENDVPNID SO_SETKEEPALIVE,
socket state = SS_ISCONNECTED SS_PRIV SS_ASYNC
Task = VTYD(18), socketid = 3, Proto = 6,
LA = 10.153.17.99:23, FA = 10.153.17.82:1121,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_KEEPALIVE SO_OOBINLINE SO_SENDVPNID SO_SETKEEPALIVE,
socket state = SS_ISCONNECTED SS_PRIV SS_ASYNC
Table 2-3 Description on the fields of the display ip socket command
Field
SOCK_STREAM
SOCK_DGRAM
SOCK_RAW
Task
socketid
Proto
sndbuf
rcvbuf
sb_cc
rb_cc
socket option
socket state
Indicates the socket type is TCP
Indicates the socket type is UDP
Indicates the socket type is raw IP
Task ID
Socket ID
Protocol number used by the socket
Sending buffer size of the socket
Receiving buffer size of the socket
Current data size in the sending buffer. The value makes sense only for the
socket of TCP type, because only TCP is able to cache data.
Current data size in the receiving buffer
Option of a socket
State of a socket
2-7
Description