Interface Vlan-Interface - H3C S3100 Series Command Manual

Description: VLAN 0001
Name: VLAN 0001
Tagged Ports:
Ethernet1/0/1
Untagged Ports:
Ethernet1/0/2
Table 1-2 Description on the fields of the display vlan command
VLAN ID
VLAN Type
Route Interface
IP Address
Subnet Mask
Description
Name
Tagged Ports
Untagged Ports

interface Vlan-interface

Syntax
interface Vlan-interface vlan-id
undo interface Vlan-interface vlan-id
View
System view
Parameters
vlan-id: Specifies the ID of a VLAN interface, in the range of 1 to 4094.
Description
Use the interface Vlan-interface command to create the VLAN interface for a VLAN and enter VLAN
interface view.
Use the undo interface Vlan-interface command to delete a VLAN interface.
You can create a VLAN interface only for an existing VLAN and must ensure that the ID of the VLAN
interface is the same as the VLAN ID.
You can use the ip address command in VLAN interface view (refer to the IP Address and Performance
Command part for the command description) to configure an IP address for this VLAN interface to
enable it to route packets for the devices in the corresponding VLAN.
Related commands: display interface Vlan-interface.
Field
VLAN ID.
VLAN type (dynamic or static).
Indicates whether the VLAN interface of the VLAN is configured with an
IP address for routing.
Primary IP address of the VLAN interface (available only on a VLAN
interface configured with an IP address). You can use the display
interface vlan-interface command in any view or the display this
command in VLAN interface view to display its secondary IP
address(es), if any.
Subnet mask of the IP address of the VLAN interface.
Description of the VLAN.
VLAN name.
Ports out of which packets are sent tagged.
Ports out of which packets are sent untagged.
1-4
Description