Display Tcp Statistics - H3C S3100 Series Command Manual

Output:
Fragment:
Reassembling:

display tcp statistics

Syntax
display tcp statistics
View
Any view
Parameters
None
Description
Use the display tcp statistics command to display the statistics about TCP packets.
Related commands: display tcp status, reset tcp statistics.
Examples
# Display the statistics about TCP connections.
<Sysname> display tcp statistics
Received packets:
Total: 753
packets in sequence: 412 (11032 bytes)
window probe packets: 0, window update packets: 0
checksum error: 0, offset error: 0, short error: 0
duplicate packets: 4 (88 bytes), partially duplicate packets: 5 (7 bytes)
out-of-order packets: 0 (0 bytes)
packets of data after window: 0 (0 bytes)
Field
forwarding Total number of IP packets forwarded by the local device
local Total number of IP packets initiated from the local device
dropped Total number of IP packets discarded
no route Total number of IP packets for which no route is available
compress fails Total number of IP packets failed to compress
input Total number of fragments received
output Total number of fragments sent
dropped Total number of fragments discarded
fragmented Total number of IP packets successfully fragmented
couldn't
Total number of IP packets that cannot be fragmented
fragment
sum Total number of IP packets reassembled
timeouts Total number of reassembly timeout IP packets
Description
2-9