Servicing Selector Mechanism; Exploded View - Selector Mechanism Cover, Selector Lever Handle - Audi A8 2003 Workshop Manual

Audi A8 2003 ➤
multitronic 01J, front-wheel drive - Edition 11.2007
4

Servicing selector mechanism

WARNING
Prior to performing work with engine running, move selector
lever to position "P" and operate parking brake button to apply
the electronic parking brake.
4.1

Exploded view - selector mechanism cover, selector lever handle

1 - Guide for sliding cover
❑ To separate the two
halves, lever out the re‐
taining tabs, see "Re‐
moving tiptronic switch -
F189- " ⇒ page 18
2 - Sliding cover
❑ With integrated magnet
for tiptronic switch -
F189- on transverse
slide.
❑ Removing and installing
⇒ "4.4 Removing and in‐
stalling tiptronic switch
F189 ", page 18
3 - Frame with printed circuit
❑ With printed circuit; can
only be renewed as
complete unit
❑ With integrated tiptronic
switch -F189-
❑ With symbol illumination
switches
❑ If malfunctions occur in
the switches, first check
that the appropriate
magnet on the sliding
cover
⇒ Item 2 (page 16)
cured properly. If neces‐
sary, renew sliding cov‐
er.
❑ The printed circuit can
be checked via "Guided
Fault Finding"
❑ Removing and installing
⇒ page 18
❑ Before renewing printed circuit when fault memory indicates fault code "18161", first check adjustment
of selector lever cable
4 - Selector lever handle
❑ Removing and installing
❑ Different versions (according to model) ⇒ Electronic parts catalogue
5 - Sleeve for selector lever
❑ Removing and installing
16
Rep. Gr.37 - Controls, housing
.
is se‐
⇒ page 33
⇒ page 17
⇒ "4.2 Removing and installing selector lever handle", page 17
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.