5
Dismantling and assembling body „II"
Overview
♦
⇒ „5.1 Body II - exploded view", page 73
♦
⇒ „5.2 Dismantling body II ", page 74
♦
⇒ „5.3 Clutch A - exploded view", page 77
♦
⇒ „5.4 Dismantling and assembling clutch A ", page 78
♦
⇒ „5.5 Clutch E - exploded view", page 83
♦
⇒ „5.6 Dismantling and assembling clutch E ", page 84
♦
⇒ „5.7 Assembling body II ", page 88
5.1
Body „II" - exploded view
Note
Some of the components shown are supplied as part of an assembly group and cannot be ordered as separate
components ⇒ Electronic parts catalogue .
1 - Clutch „A"
2 - Circlip
❑ For planet carrier „I"
❑ Renew
3 - Sun gear „I"
4 - Axial needle bearing
5 - Planet carrier „I"
6 - Rectangular section seals
❑ Renew
7 - Axial needle bearing
8 - Clutch „E" with annulus „I"
9 - Axial needle bearing
10 - Inner plate carrier „E" with
intermediate shaft
11 - Axial needle bearing
12 - Inner plate carrier „A"
13 - Inner plate carrier „B"
14 - Circlip
❑ Must be re-used
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Audi A6 2005 ➤ , Audi A8 2003 ➤
5. Dismantling and assembling body „II"
73