Roof Insert - Sliding/Tilting Sunroof: Cleaning And Lubricating; With Respect To The Correctness Of Information In This Document. Copyright By Audi Ag - Audi A8 2003 Maintenance Manual

Audi A8 2003 ➤
Maintenance - Edition 06.2014
3.24 Roof insert - sliding/tilting sunroof:
cleaning and lubricating
Special tools and workshop equipment required
♦ Lubricating paste - G 060 751 A2-
♦ Krytox lubricating paste - G 052 141 A2-
♦ Cleaning solution - D 009 401 04-
♦ Industrial vacuum cleaner, e.g. wet/dry vacuum cleaner - VAS
5128-
♦ Commercially available paintbrush: approx. 15 mm wide and
bent by approx. 40°
♦ Fine-pored sponge (e.g. a piece of household sponge without
a scouring surface)
Cleaning and lubricating the roof insert is a repair measure and
should be charged separately.
Protect vehicle interior from becoming dirty.
Step 1 - cleaning and lubricating glass panel seal:
– Tilt open glass panel at rear.
– Remove all accessible grease and dirt residue from glass pan‐
el seal using cleaning solution - D 009 401 04- and a lint-free
cloth.
– Use sponge -1- to apply a small amount of Krytox lubricating
paste - G 052 141 A2- to glass panel seal at sides and rear
edge -arrows-. Make sure that no coarse residue remains visi‐
ble after applying lubricant.
– Open glass panel completely.
– Using cleaning solution - D 009 401 04- and a lint-free cloth,
clean glass panel seal at front in area that has not been lubri‐
cated yet.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability

with respect to the correctness of information in this document. Copyright by AUDI AG.

42
3. Maintenance