Table of Contents
Advertisement
CONFIGURING NETWORKS
Setting the Network Name
Setting the Connection Type
Setting the Line Configuration
2-22
The
Set Network Name
appears on menus and prompts. Choose any name of no more than
10 characters and spaces combined as the network name. This name
appears on the menus after you exit and reenter the menu system.
The
Set Connection Type
direct T1 connection or a PRI connection. When you set the
connection type, the menu appropriate for that type appears. See
ÒConÞguring a Direct T1 LineÓ or ÒConÞguring a T1 PRI LineÓ for
more information.
The
Set Line Configuration
(PRI) or direct (T1) connection, depending upon the connection type
choice you made.
Configuring a Direct T1 Line
When you choose
T1
Network ConÞguration menu and then select
you see the following menu:
option sets a unique network name that
option speciÞes whether you are using a
option conÞgures the line for either dialed
in the
Set Connection Type
option on the T1
,
Set Line Configuration
Advertisement
Table of Contents
