Setting The Line Configuration - PictureTel Venue-2000 Administrator's Manual

CONFIGURING NETWORKS
Setting the Line Configuration
Set the rate at which
data is transmitted
over the network
Specify the source that
controls the timing
Set the channel type
Enable error checking
Specify the national
spare bits used in
framing
Specify the
international spare bits
used in framing
F Y I
2-32
When you choose
ConÞguration menu, you see this menu:
The default values for the settings in this menu are:
Setting
Set Timing Mode
Set Channel Type
Set CRC4
The settings you choose on the E1 Line ConÞguration menu
F.Y.I.
must match the settings given to you by your network
provider. Contact your network provider for more
information.
Set Line Configuration
Network
Unrestricted
Enabled
from the E1 Network
Default