Table of Contents
Advertisement
CONFIGURING AND ADJUSTING THE VIDEO AND AUDIO
Configure your main camera
Configure your additional video
source
5-6
To permit camera control by the far end:
From the Video Configuration menu, choose Permit Control by Far
End.
The indicator light toggles on or off. If the indicator light is on,
the far-end site can control your camera. If the indicator light is
off, the far-end site canÕt control your camera.
Configuring the Camera/Video Source
You use the Video Source ConÞguration menu to conÞgure your
main camera, any document or auxiliary cameras you have, and the
video connection to your VCR. Through this menu you can:
Determine the name used to refer to the camera and VCR on
menus and prompts
Adjust the white balance of the cameras
Adjust the focus of the cameras
Adjust the exposure or brightness of the cameras
Set the pan direction for each camera and determine how the
PIP appears
Determine the video image that is sent to the VCR
When you choose
Configure Camera/Video Sources
ConÞguration menu, you see a menu similar to this:
Choose the video source that you want to conÞgure. If you have
only one camera, Main (or whatever name you have given the
camera) is the only menu item listed. If you have additional video
sources, you can choose the source that you want to conÞgure.
from the Camera
Advertisement
Table of Contents
