CONFIGURING DATA PORTS
Configuring Data
Ports
6-4
The default settings for this menu are:
Setting
Protocol
Data Rate
Data Bits
Stop Bits
Parity
Flow Control
To conÞgure a data port:
1. From the System Configuration menu, choose Set Data Port
Configuration.
2. From the Set Data Port Configuration menu, choose Set Protocol .
3. Choose the setting you want to change.
A pop-up window appears, listing your choices for that setting.
The following table describes the choices for each setting.
4. Choose the desired option and press ENTER .
The current setting appears.
Default
Port Disabled
38400
8
1
None
CTS/RTS