Table of Contents
Advertisement
No System Power
If you have these symptoms...
The light on the front of the
electronics module is not lit.
The fan is not rotating.
The following table summarizes the corrective actions that you can
follow if your system appears not to have power.
1. Make sure that power is available to your facility and
that the circuit breakers supplying power to the system
are not tripped.
For example, plug in another device whose power
requirements are equal, and conÞrm that it functions.
2. Make sure that the system power cord is plugged
securely into the wall outlet and into the electronics
module.
3. If your system plugs into a line conditioner or noise
suppressor instead of a wall outlet, make sure that the
device is turned on.
4. Make sure that the power switch on the front of the
electronics module is on.
If you still do not have power to your Venue•2000, call
your PictureTel service provider.
Do this...
No System Power
8-3
Advertisement
Table of Contents
