Table of Contents
Advertisement
Specify the type of
network switch to which
the PRI line is
connected
Specify the type of
service that is provided
on the PRI line
Enter a number that is
dialed before all phone
numbers
Enable automatic redial
Enter the local telephone
numbers (and for some
switch types, the SPIDs)
corresponding to each of
the incoming lines
Automatically adjust to the
completed channel rate
F.Y.I.
F Y I
The settings you choose on the T1 Protocol ConÞguration
menu must match the settings given to you by your network
provider. Contact your network provider for these settings.
The default values for the settings in this menu are:
Setting
Set Redial on Line Drop
Set Automatic Rate Adaption
ConÞguring a T1 Network
Default
Enabled
Enabled
2-27
Advertisement
Table of Contents
