Selecting A Keypad To Accept - PictureTel Venue-2000 Administrator's Manual

CONFIGURING GENERAL OPTIONS FOR YOUR SYSTEM
Set up your system to respond
only to a keypad that is set to a
specific channel
Disable the response of the
Look-At-Me-Button so that it
doesn't conflict with the other
systems
4-16
The default setting for this menu is:
Setting
Select Keypad to Accept

Selecting a Keypad to Accept

In most cases, you will want the videoconferencing system to accept
input from all keypads. However, you may have more than one
videoconferencing system in the same room. In this case, you may
need to set up your system to respond only to the appropriate
keypad. You do this by setting the channel on which the keypads
transmit and setting the systems to respond accordingly.
The wireless keypad is set to a default channel of 0. This channel is
always accepted by the system.
You can change the channel by changing the DIP switch settings on
the back of the keypad, as shown in the following illustration. Use
the chart to determine the values of the switch settings.
Default
All