Table of Contents
Advertisement
F Y I
Running
Self-Tests
Run all of the hardware tests
Test specific hardware modules
Display the results of the self-tests
Run quick or extended tests on
the system
Copy the fault and self-test logs to
a diskette
When you run system tests, the system goes from operating
F.Y.I.
mode to test mode. You will notice a slight delay when the
system switches between these modes. In some cases, you
may see a message that indicates the system is restarting.
The default setting in this menu is:
Setting
Set Remote Access Level
When you choose
this menu:
None
from the System Tests menu, you see
Run Self-Test
Running Self-Tests
Default
7-3
Advertisement
Table of Contents
