Setting Camera Presets - PictureTel CONCORDE4500 4500 User Manual

Setting Camera Presets

You may know before a videoconference that during the conference you will want
the camera to point at a particular person or location, such as the main speaker or
a whiteboard. Camera presets are buttons that let you set and store camera
positions either before or during a meeting.
After you set a camera preset, you simply press the preset number button (for
example, ) to make the camera move to that stored position.
1
You can set or change the presets at any time, but itÕs better to do
it before you start your meeting so that you can easily use them
during the videoconference.
Also, when you Þrst press the
camera automatically centers and zooms out to show more of the
room. Keep it set like this or adjust it slightly to get a better view
of the room.
To set a camera preset with the wireless keypad:
1. Select the camera you want to preset by pressing the appropriate
button (for a near-end camera) or
You can only set presets for the far-end site if that site is conÞgured to allow
far-end camera control.
2. Adjust the camera by pressing
section of the keypad (or by using the camera's manual controls, if it has them).
Keep doing this until the image appears exactly the way you want it.
3. Press in the
SET
4. Press a preset number button or
You can also press the blue button or
preset position for that button.
RECEIVE
POINT
or
NEAR END FAR END
SHOW ROOM
button, the main
SHOW ROOM
button (for a far-end camera).
and in the
ZOOM NEAR END
section of the keypad.
to store that camera position.
on the LAMB to store a
SHOW ROOM
PREVIEW
or
FAR END
49