Permitting Camera Control By The Far End - PictureTel Venue-2000 Administrator's Manual

Enable far-end camera control
Configure cameras and VCRs
Set the camera to automatically
locate the speaker
Setting
Permit Control by Far End

Permitting Camera Control by the Far End

The Far-End Camera Control feature lets users at the far-end site
pan, tilt, and zoom your main and auxiliary cameras (if the
videoconferencing system complies with the H.320 standards).
However, the far-end site can control your camera only when you
permit control at your site.
The factory-default setting is to allow far-end control. This menu
item toggles between enabling and disabling far-end camera
control.
When you select this feature at your site, the far end can also choose
which of your video sources is displayed at the far end. When the
far-end site changes your video source or controls your camera, you
see an icon in the lower left corner of the screen and see the image
change in the Picture-in-Picture (PIP) window.
Setting the Video ConÞguration
Default
On
5-5