Table of Contents
Advertisement
RUNNING SYSTEM TESTS
Running a Full Self-Test
Testing Hardware Modules
Test subsystems vital to the
system
Test the video hardware
Test the audio processor board
Test one or all of the network
interface boards
7-4
If you want to test all of the hardware components of your system,
run a full self-test. Depending on your systemÕs conÞguration, the
quick test takes approximately three minutes and the extended test
takes approximately Þve minutes.
To run a full self-test:
Choose Run Full Self-Test from the Self-Tests menu.
When the test is complete, the Self-Tests results screen appears.
Test results can be either OK or Defective. If the test indicates a
defective component, call your PictureTel service provider. See
the ÒDisplaying Self-Test ResultsÓ section later in this chapter
for more information.
If you suspect a problem with a particular hardware component,
you can run a test on that speciÞc component. The Hardware
Module Self-Tests menu appears when you choose
from the Self-Tests menu.
Hardware Module
Test a Particular
Advertisement
Table of Contents
