Table of Contents
Advertisement
CONFIGURING NETWORKS
Configuring a
Switched-56
Network
Set the network name that
appears on menus and prompts
Enter a number that is dialed
before all phone numbers
Enable automatic redial when
one line of a multiline call is
dropped
Setting the Network Name
2-18
When you choose
Configure Switched-56
ConÞguration menu, you see this menu:
Plug the lower numbered phone line into the top connector
on the Switched-56 network interface board. Plug the higher
numbered phone line into the bottom connector. When sites
are calling you, they should dial the lower numbered phone
number Þrst.
The default values for the settings in this menu are:
Setting
Set Network Name
Set Redial on Line Drop
The
Set Network Name
menus and prompts.
Choose any name of no more than 10 characters and spaces combined as
the network name. This name appears on the menus after you exit
and reenter the menu system.
from the Network
Switched-56
On
option sets the network name that appears on
Default
Advertisement
Table of Contents
