Table of Contents
Advertisement
To enter SPIDs or local numbers:
1. Choose Set Number Type from the Triple-BRI Protocol
Configuration menu.
Depending on the dialect you are using, you may be required to
enter SPIDs or local numbers or both.
2. Choose Set SPIDs or Set Local Numbers .
The Set SPIDs or Set Local Numbers entry screen appears. The
following screen is an example of the Set Local Numbers entry
screen:
3. Enter the appropriate numbers associated with each ISDN line.
Press ENTER after each number.
The message
Please restart system for changes to take effect
appears
.
4. Restart the system for the changes to take effect.
ConÞguring an ISDN Triple-BRI Network
2-15
Advertisement
Table of Contents
