Table of Contents
Advertisement
CONFIGURING NETWORKS
Contact your network
provider for these values
2-34
Setting CRC4
The
option determines whether or not checking is
Set CRC4
performed on data to see if an error has occurred in the transmitting,
reading, or writing of the data. The choices are:
Disabled
Enabled
Enable Err1
Setting the National Bits
SpeciÞes the spare bits used in the CEPT (European Conference of
Postal and Telecommunications Administrators) frame format.
Contact your network provider for this information.
When you choose
Set National Use Bits
ConÞguration menu, you see this menu:
The default values for the settings in this menu are:
Setting
National Bit 1
National Bit 2
National Bit 3
National Bit 4
National Bit 5
The bits toggle between
from the E1 Line
1
1
1
1
1
and
.
0
1
Default
Advertisement
Table of Contents
